24 MHz Oscillator
Email to a Friend
Availability: In stock
$2.63

Quick Overview
Performs the same function as a crystal, except all the required circuitry is included���������just add power. 5V input, +-50PPM frequency accuracy, 25mA current draw, resistance weld package (durable crystal attachment), drives both HCMOS and TTL logic, fits in 8-pin DIP hole pattern (ready for bread board).
24 MHz Oscillator
Spec sheet: here (ECS-2200BX-240)

This oscillator features a tri-state on/off switch that can be used to conserve power if the oscillator is not needed. Apply 0V to pin 1 to turn it off. An internal pull-up resistor keeps it on otherwise.

Consider using an oscillator socket for installation. Specially designed for the oscillator pins.

There are several different ways to provide a clock source, including crystals, oscillators, RC circuits, and resonators; this article gives a good comparison.





PPM (Parts per Million): This is like a percent error (1000 PPM = .1% error), and is convenient for calculating error with crystals. 5ppm on a 4MHz crystal = 5*4 = 20Hz possible error. Most microcontroller applications don't require too much accuracy, 100ppm is fine.
Additional Information

SKU
ci0088
Manufacturer Part Number
No
RoHS Compliant
n/a
Flammable
N/A
Small Shipping Item
N/A

Write Your Own Review
You're reviewing: 24 MHz Oscillator

OR HOW ABOUT THESE