Items 1 to 12 of 33 total per page
Page: 1 2 3
Addtional DB9 Connector Kit for SPK_WRT

The parts necessary to install a 2nd serial port: <ul> <li>(1) rt. angle 3 pos. friction lock header </li> <li>(3) crimp pins, female</li> <li>(1) 3 pos. crimp housing</li> <li>(1) db9 female solder cup connector</li> <li>mounting hardware for the db9: 2 each, lock washer, nut, screw</li> </ul>

Read More
Arduinome BLACK Acrylic Case Kit

An opaque, black case for the arduinome, a DIY version of the monome (monom.org). Designed for SparkFun 64 SparkFun buttons and arduino Diecimila.

Read More
Arduinome Clear Acrylic Case Kit

A case for the arduinome, a DIY version of the monome (monom.org). Designed for SparkFun 64 SparkFun buttons and arduino Diecimila.

Read More
Chip Quik� Surface Mount Desoldering Kit

This kit contains everything needed to desolder multi-pin surface mount chips. It's basically a low melting point alloy that, when mixed with the existing solder on a joint, keeps it molten long enough to release all the pins at once.

Read More
Chip Quik� Surface Mount Desoldering Kit (LEAD FREE)

This kit contains everything needed to desolder multi-pin surface mount chips. It's basically a low melting point alloy that, when mixed with the existing solder on a joint, keeps it molten long enough to release all the pins at once.

Read More
Deluxe Electronics Essentials Tool Kit

The basic essential tools, including a multimeter, 40W adjustable iron and Clamp.

Read More
Electronics Essentials Basic Tool Kit

Hand-picked essential tools for electronics work. These basics make a great starter set, and will suffice for a large amount of work.

Read More
Electronics Tools and Parts Starter Kit

The bare essential tools plus a set of parts that can be used for many basic projects, including resistors, caps, a timer, jacks, pots, buzzer, mic, and more.

Read More
hakko 808 desoldering gun vacuum kit

A faster and safer way to desolder parts. Our testing showed this gun to be much more effective than other low cost guns in terms of suction strength, time between cleanings, and overall lifespan.

Read More
Jumper Wire Kit (140 Piece)

140 pieces, pre-formed #22 AWG solid wire, 14 different lengths. Use for fast bread-board work.

Read More
Jumper Wire Kit (350 pieces)

350 different pre-cut and bent 22 AWG solid wires, 25 of each color and length. These make bread board prototyping substantially neater and faster.

Read More
Jumper Wire Kit (350)

350 piece kit of pre-stripped and pre-formed jumpers made for fast bread-boarding. 14 different lengths.

Read More

Jumper Wire Kit (350)

$8.99

Out of stock

Items 1 to 12 of 33 total per page
Page: 1 2 3
Our Blog
New Soldering Q & A Site

New Soldering Q & A Site

We're happy to introduce a brand new Electronics Soldering Q & A site where you can ask questions about soldering. Not sure what soldering iron to buy? Having trouble desoldering a chip with a lot of legs? No idea how to solder a chip without any legs? Ask away!

Read More

The Essence of How Bitcoin Works

A brief intro to the main ideas behind How Bitcoin Works, including how money is transferred, who keeps track of it, and how the whole thing is secured.

Read More

SMT Stencil Review, including BGA Reballing

A review of SMT stencils from BEST, Inc. 10% off coupon: 'Curious'

Read More

How Bitcoin Works in 5 Minutes

A short introduction to how Bitcoin Works. Written version:http://www.imponderablethings.com/2014/04/how-bitcoin-works-in-5-minutes.html

Read More

RPi Spectrum Analyzer Display with LED Strip

A python-based real-time spectrum analyzer. Plays MP3s and does FFTs in real time using code from the LightShow Pi project and Numpy. Full code and instructions at instructables.

Read More