VMeter: USB MIDI Controller Touch Strip & Display

We’re making a new product called VMeter that’s a USB MIDI Controller Touch Strip and Display. It’s going to be sold through a new site: VMeter.net. In addition to a music controller, it has the potential to be used as a general purpose input touch strip and output meter display. It uses a USB HID interface (like a mouse or keyboard), making it relatively easy to interface with. We’ll be publishing both the protocol and computer-side source shortly. You could even use it with an arduino if you get a USB host shield. There are 8 capacitive touch sensors on the inside, and all the raw values are sent out, making it possible to do pressure sensing and even some limited multi-touch sensing.

Leave a Reply

Leave a Reply

About

CuriousInventor launched in late 2006 (pre-arduino era!) as a place to enable hobbyists, students, and musicians to create their own technology. We sold open-source kits and tools, and offered numerous guides & videos on things like soldering, metal working, screws, electronics, and more. 

The store is now mostly empty, but we’ve kept the product pages and guides up since they have useful information. Many of our guides and videos still rank on the first page of google searches and have been seen millions of times. Content on this site and the CuriousInventor YouTube channel produced by Scott Driscoll.

Top Videos