SchmartBoard|ez QFP .65mm Pitch, 112-160 pins
Email to a Friend
Availability: In stock

Quick Overview
This board supports 112-160 pin QFP, TQFP, PQFP package ICs with 0.65mm pitch. Just push solder in pre-filled troughs towards the leads to solder. Troughs also hold chip in perfect alignment; no microscope necessary.

SchmartBoard|ez QFP .65mm Pitch, 112-160 pins

QFP, or Quad Flat Packages have 4 sides of gull wing leads that stick out. TQFP and PQFP stand for "Thin" and "Plastic", respectively. 4x4" board. The solder filled troughs are slightly inset below the surface, which helps to hold the chip leads in perfect position. No microscope is necessary for alignment. The only requirement is a tip slightly smaller than the lead size. Recommended tip temperature is 750 - 800 degrees F. This board is RoHS Compliant with lead-free solder. detailed pdf Manufacturer's part number: 202-0031-01 Video demonstrating hand soldering of a QFP package:

Additional Information

Manufacturer Part Number
RoHS Compliant
Small Shipping Item

Write Your Own Review
You're reviewing: SchmartBoard|ez QFP .65mm Pitch, 112-160 pins