Hakko 808 Desoldering Vacuum Gun Kit
Email to a Friend
This product is out of stock.

Quick Overview
A faster and safer way to desolder parts. Our testing showed this gun to be much more effective than other low cost guns in terms of suction strength, time between cleanings, and overall lifespan.
Hakko 808 Desoldering Vacuum Gun Kit

The Hakko 808 is a handy, portable desoldering tool with a built-in vacuum pump.  No separate station is required.

���� thin, comfortable grip and low vibration

This unique Hakko design places the pump and motor above, not inside, the grip. Vibration is kept to a minimum, and the grip is thin and easy to hold. Delicate tasks are performed with greater ease; the tool can be used for long periods without operator fatigue.

���� simple and inexpensive pump maintenance

The new, miniature, high-performance diaphragm pump is housed in the chamber at the rear of the Hakko 808. Pump maintenance is quick and easy-simply remove the cover. If repairs are ever needed, replacement parts are inexpensive.

���� tip-to-ground potential difference no greater than 2mV

���� tip-to-ground resistance no greater than 2 ohms

���� adjustable temperature control (380���C - 480���C / 715���F - 895���F)

���� includes Carrying Case and Hot Sock

Power Consumption 100W
Heating Element Ceramic heater (80W)
Motor Output 6.5W
Temperature 380���C - 480���C (715���F - 895���F)
Temperature Stability
(at idle)
Tip-to-Ground Resistance Under 2 ohms
Tip-to-Ground Potential Under 2mV
Vacuum Pump Double-cylinder diaphragm pump
Vacuum Pressure 600 mmHg (24 in. Hg)
Suction Flow 10 l/min.
(w/o Case)
170(H) x 235(W) mm
(6.7(H) x 9.3(W) in.)
(w/o Case)
420 g (0.9 lb.)
Standard Nozzle A1005 (Nozzle dia. 1.0mm)

NOTE: 120V AC, 60Hz.  Not for 240V.

Additional Information

Manufacturer Part Number
RoHS Compliant
Small Shipping Item

Write Your Own Review
You're reviewing: Hakko 808 Desoldering Vacuum Gun Kit