Items 25 to 36 of 45 total per page
Page: 1 2 3 4
Flux / Alcohol Bottle

A fine tipped needle helps to distribute flux only where it's needed. Not only does flux leave a sticky residue, but many types can be corrosive over time.

Read More

Flux / Alcohol Bottle

$2.79
Flush Cutters

These let you trim off component leads close to the board since the cutting edges of the blades are flush with the bottom of the cutters.

Read More

Flush Cutters

$3.99
PanaVise Junior Clamp

A small, sturdy clamp that can be rotated to almost any angle to hold work or tools.

Read More

PanaVise Junior Clamp

$23.99

Out of stock

Deburring Tool

Quickly remove rough edges on drill holes and edges of parts. In most cases, this tool works faster than a file, and can deburr irregular edges that might otherwise require multiple files.

Read More

Deburring Tool

$8.64
Prick Punch

A prick punch is used to precisely create a dimple in metal for layout work or further expansion by a center punch. A prick punch has a shaper point than a center punch which can help in initial placement.

Read More

Prick Punch

$4.96

Out of stock

Center Punch

This is used to make a small dimple in metal before drilling a hole. Without a starting indentation, drill bits have a tendency to "walk" slightly away from their intended mark.

Read More

Center Punch

$5.93
Scriber

A pencil-like tool with a sharp point that's used to scratch layout lines into metal.

Read More

Scriber

$7.43
6in Digital Caliper

One of the most useful tools, calipers are used to quickly measure outside and inside dimensions, find out drill and screw sizes, measure hole depths, and even scribe lines.

Read More

6in Digital Caliper

$18.99

Out of stock

Sponge

A sponge with a hole provides an edge that is easier to clean a soldering tip with than a flat surface. Also, used solder falls into the hole and away from the cleaning surface.

Read More

Sponge

$1.95

Out of stock

Solder Sucker

A spring loaded vacuum that quickly desolders joints. Comes with heat resistant tip, ESD dissipative body, and auto-cleaning rod that pushes used solder out the nozzle on each reload.

Read More

Solder Sucker

$7.95
Long Tapping Wrench #0-1/2"

This holds from size 0 through 1/2".

Read More
10X Magnifying Loupe

The most in-expensive way to check fine-pitch surface mount soldering.

Read More

10X Magnifying Loupe

$14.99

Out of stock

Items 25 to 36 of 45 total per page
Page: 1 2 3 4
Our Blog

Course on Bitcoin, Blockchain, Decentralization

Our new course on Bitcoin, Blockchain and Decentralized technology gives a crash course on Bitcoin and many other blockchain projects, like Ethereum, MakerDao, IPFS, SlockIt, the DAO, Zerocash, and more. There are demos on how to acquire, store and use Bitcoin, including web, hardware and paper wallets. Some of the latest topics in Bitcoin are also covered, like soft vs hard forks, segregated wit

Read More

The Essence of How Bitcoin Works

A brief intro to the main ideas behind How Bitcoin Works, including how money is transferred, who keeps track of it, and how the whole thing is secured.

Read More

SMT Stencil Review, including BGA Reballing

A review of SMT stencils from BEST, Inc. 10% off coupon: 'Curious'

Read More

How Bitcoin Works in 5 Minutes

A short introduction to how Bitcoin Works. Written version:http://www.imponderablethings.com/2014/04/how-bitcoin-works-in-5-minutes.html

Read More

RPi Spectrum Analyzer Display with LED Strip

A python-based real-time spectrum analyzer. Plays MP3s and does FFTs in real time using code from the LightShow Pi project and Numpy. Full code and instructions at instructables.

Read More