Arduinome Clear Acrylic Case Kit

Availability: Out of stock

$69.99

Quick Overview

A case for the arduinome, a DIY version of the monome (monom.org). Designed for SparkFun 64 SparkFun buttons and arduino Diecimila.

Move your mouse over image

Details

Comes with all necessary hardware, including:

(16) 8-32 screws
(16) 8-32 nuts
(4) rubber feed
(2) 4-40 standoffs
(1) 2-56 screw (for small arduino mounting hole)
(5) 2-56 nuts (for small arduino standoff and nut)
(20) 4-40 .5" screws for buttons
(20) 20 lock washers for buttons
(22) 4-40 nuts (for standoffs and button screws)

You'll also need:

arduino Diecimila
unsped shield
spark fun buttons and pcbs
(64) bright LEDs (1000mcd blue LEDs shown)
(64) small-signal diodes
8-Bit Shift Register. mouser: 512-MM74HC164N
8-Bit PISO Shift Reg, mouser: 511-M74HC165
10uF cap
(3) .1uF caps
10 Pin Common Bus Resistor Network, mouser: 266-100K-RC
(2) 2x8 headers
(2) 16 pin IDC sockets
ribbon cable
(1)single row male headers
24 pos. socket, 14 pos. socket, 16 pos. socket
MAX7721 or MAX7719
current limiting resistor, see the forward voltage chart here

Customer Build (black version): dj_edition's build Please see our blog post detailing the build process. SparkFun buttons are larger than the monome buttons. Cases and faceplates are not compatible.