We’re making a new product called VMeter that’s a USB MIDI Controller Touch Strip and Display. It’s going to be sold through a new site: VMeter.net. In addition to a music controller, it has the potential to be used as a general purpose input touch strip and output meter display. It uses a USB HID interface (like a mouse or keyboard), making it relatively easy to interface with. We’ll be publishing both the protocol and computer-side source shortly. You could even use it with an arduino if you get a USB host shield. There are 8 capacitive touch sensors on the inside, and all the raw values are sent out, making it possible to do pressure sensing and even some limited multi-touch sensing.