Hakko 808 Desoldering Vacuum Gun Kit

Description

The Hakko 808 is a handy, portable desoldering tool with a built-in vacuum pump.  No separate station is required.

���� thin, comfortable grip and low vibration

This unique Hakko design places the pump and motor above, not inside, the grip. Vibration is kept to a minimum, and the grip is thin and easy to hold. Delicate tasks are performed with greater ease; the tool can be used for long periods without operator fatigue.

���� simple and inexpensive pump maintenance

The new, miniature, high-performance diaphragm pump is housed in the chamber at the rear of the Hakko 808. Pump maintenance is quick and easy-simply remove the cover. If repairs are ever needed, replacement parts are inexpensive.

���� tip-to-ground potential difference no greater than 2mV

���� tip-to-ground resistance no greater than 2 ohms

���� adjustable temperature control (380���C – 480���C / 715���F – 895���F)

���� includes Carrying Case and Hot Sock

Power Consumption	100W
Heating Element	Ceramic heater (80W)
Motor Output	6.5W
Temperature	380���C – 480���C (715���F – 895���F)
Temperature Stability (at idle)	���5���C/���9���F
Tip-to-Ground Resistance	Under 2 ohms
Tip-to-Ground Potential	Under 2mV
Vacuum Pump	Double-cylinder diaphragm pump
Vacuum Pressure	600 mmHg (24 in. Hg)
Suction Flow	10 l/min.
Dimensions (w/o Case)	170(H) x 235(W) mm (6.7(H) x 9.3(W) in.)
Weight (w/o Case)	420 g (0.9 lb.)
Standard Nozzle	A1005 (Nozzle dia. 1.0mm)

NOTE: 120V AC, 60Hz.  Not for 240V.