24 MHz Oscillator

$2.63

Performs the same function as a crystal, except all the required circuitry is included���������just add power. 5V input, +-50PPM frequency accuracy, 25mA current draw, resistance weld package (durable crystal attachment), drives both HCMOS and TTL logic, fits in 8-pin DIP hole pattern (ready for bread board).

5 in stock

SKU: ci0088 Category:

Description

Spec sheet: here (ECS-2200BX-240)

This oscillator features a tri-state on/off switch that can be used to conserve power if the oscillator is not needed. Apply 0V to pin 1 to turn it off. An internal pull-up resistor keeps it on otherwise.

Consider using an oscillator socket for installation. Specially designed for the oscillator pins.

There are several different ways to provide a clock source, including crystals, oscillators, RC circuits, and resonators; this article gives a good comparison.



PPM (Parts per Million): This is like a percent error (1000 PPM = .1% error), and is convenient for calculating error with crystals. 5ppm on a 4MHz crystal = 5*4 = 20Hz possible error. Most microcontroller applications don’t require too much accuracy, 100ppm is fine.

Additional information

Weight 0.01 kg

Reviews

There are no reviews yet.

Be the first to review “24 MHz Oscillator”