QFN, or Quad Flat No-Lead, packages (also called Chip Scale) are very difficult to hand solder due to their lack of leads, and typically a heat sink on the bottom. This board has pre-installed solder traces that the chip sits on top of, as well as a via through which the bottom-side heat sink can be soldered. 2×2" in size.
The only requirement is a tip slightly smaller than the lead size and liquid flux. Recommended tip temperature is 750 – 800 degrees F.
Manufacturer’s part number: 202-0018-01
Video demonstrating hand soldering of a QFN package:
There are no reviews yet.